Dell PowerConnect M6220 User's Guide - Page 555
Secondary Address, Secondary Subnet Mask, Add Secondary, Loopbacks Configuration, Create, Loopback
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 555 highlights
Figure 9-58. Loopback Configuration - Add Secondary Address 8. Complete the Secondary Address, Secondary IP Address, and Secondary Subnet Mask fields. 9. Click the Add Secondary button. The secondary address is saved, and the webpage reappears showing the primary and secondary loopback addresses. Creating a New Loopback (IPv6) 1. Open the Loopbacks Configuration page. 2. Select Create from the Loopback drop-down menu. 3. Specify an ID to use in the Loopback ID field. 4. Click Apply Changes. The Loopback ID field goes away, and the remaining loopback fields display. Configuring Routing 553
Configuring Routing
553
Figure 9-58.
Loopback Configuration - Add Secondary Address
8.
Complete the
Secondary Address
,
Secondary IP Address
, and
Secondary Subnet Mask
fields.
9.
Click the
Add Secondary
button. The secondary address is saved, and the webpage reappears showing
the primary and secondary loopback addresses.
Creating a New Loopback (IPv6)
1.
Open the
Loopbacks Configuration
page.
2.
Select
Create
from the
Loopback
drop-down menu.
3.
Specify an ID to use in the
Loopback ID
field.
4.
Click Apply Changes.
The Loopback ID field goes away, and the remaining loopback fields display.