Dell PowerConnect M6220 User's Guide - Page 660
Multicast Static Routes Configuration
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 660 highlights
Multicast Static Routes Configuration Use the Multicast Static Routes Configuration page to configure a new static entry in the Mroute table or to modify an existing entry. To display the page, click IP Multicast > Multicast > Static Routes Configuration in the tree view. Figure 12-4. Multicast Static Routes Configuration The Multicast Static Routes Configuration page contains the following fields: • Source - Select Create Static Route to configure a new static entry in the Mroute table, or select one of the existing entries from the drop-down menu. • Source IP - Enter the IP Address that identifies the multicast packet source for the entry you are creating. • Source Mask - Enter the subnet mask to be applied to the Source IP address. • RPF Neighbor - Enter the IP address of the neighbor router on the path to the source. • Metric - Enter the link state cost of the path to the multicast source. The range is 0-255, and the default is 1. You can change the metric for a configured route by selecting the static route and editing this field. • Interface - Select the interface number from the drop-down menu. This is the interface that connects to the neighbor router for the given source IP address. 658 Configuring IP Multicast