Dell PowerConnect M6220 User's Guide - Page 347
Configuring Voice VLAN, GVRP Global Parameters, Show All, GVRP Port Parameters Table, Apply Changes
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 347 highlights
Modifying GVRP Parameters for Multiple Ports 1. Open the GVRP Global Parameters page. 2. Click Show All. The GVRP Port Parameters Table displays. 3. Click Edit for each Interface/LAG to modify. 4. Edit the GVRP Port Parameter fields as needed. 5. Click Apply Changes. The GVRP Port Parameter settings are modified, and the device is updated. Configuring GVRP Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • GVRP Commands Configuring Voice VLAN The Voice VLAN feature enables switch ports to carry voice traffic with defined priority. The priority level enables the separation of voice and data traffic coming onto the port. A primary benefit of using Voice VLAN is to ensure that the sound quality of an IP phone is safeguarded from deteriorating when the data traffic on the port is high. The system uses the source MAC address of the traffic traveling through the port to identify the IP phone data flow. The Voice VLAN feature supports a configurable voice VLAN DSCP parameter. This allows you to set the DSCP value. This value is later retrieved by LLDP when the LLDPDU is transmitted if LLDP has been enabled on the port and the required TLV is configured for the port. Use the Voice VLAN Configuration page to configure and view voice VLAN settings that apply to the entire system and to specific interfaces. To display the page, click Switching > Voice VLAN > Configuration in the tree view. Configuring Switching Information 345