Dell PowerConnect M6220 User's Guide - Page 629
Match to Protocol ID, Destination L4 Port
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 629 highlights
Match Attributes (IPv4) Use the following fields to match IPv4 packets to a class. Click the check box for each field to be used as a criterion for a class, and enter data in the related field. You can have multiple match criteria in a class. The logic is a Boolean "logical-and" for this criteria. • Source IP Address - Requires a packet's source port IP address to match the address listed here. • Subnet Mask - The subnet mask of the source IP address. This field is required when Source IP Address is checked. • Destination IP Address - Requires a packet's destination port IP address to match the address listed here. • Subnet Mask - The subnet mask of the destination IP address. This field is required when Destination IP Address is checked. • Source L4 Port- Requires a packet's TCP/UDP source port to match the port listed here. Select one of the following options: - Select From List - Click to select from a list of well known source ports to which packets are matched. - Match to Port - Click to add a user-defined Port ID to which packets are matched. Range is 065535. • Destination L4 Port - Requires a packet's TCP/UDP destination port to match the port listed here. Select one of the following: - Select From List - Select from a list of well known destination ports to which packets are matched. - Match to Port - Click to add a user-defined Port ID to which packets are matched. Range is 065535. • Protocol - Requires a packet's protocol to match the protocol listed here. Select one of the following: - Select from List - Select from the drop-down list of protocols. - Match to Protocol ID - Enter a protocol ID to which packets are matched. Range is 0-255. • EtherType - Requires a frames' Ethertype to match the Ethertype listed here. Select one of the following: - Select from List - Select from the drop-down list of EtherTypes. - Match to Value - Enter an Ethertype ID to which packets are matched. Range is 0600-FFFF. • Class of Service - Requires a packet's Class of Service (CoS) for incoming packets to match the CoS entered here. Range is 0-7. • Source MAC Address - Requires a packet's Source MAC Address for incoming packets to match the address entered here. Configuring Quality of Service 627