Dell PowerConnect M6220 User's Guide - Page 543
Interface IP Address, Owner, VMAC Address, Auth Type, State, Status, Secondary IP Address
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 543 highlights
• Interface IP Address - The actual IP Address associated with the interface used by the Virtual Router. • Owner - Set to True if the Virtual IP Address and the Interface IP Address are the same, otherwise set to False. If this parameter is set to True, the Virtual Router is the owner of the Virtual IP Address, and always wins an election for master router when it is active. • VMAC Address - The virtual MAC Address associated with the Virtual Router, composed of a 24-bit organizationally unique identifier, the 16-bit constant identifying the VRRP address block and the 8bit VRID. The Virtual MAC address is 00:00:5e:00:01:XX where XX is the VRID. • Auth Type - The type of authentication in use for the Virtual Router - None - Specifies that the authentication type is none. - Simple - Specifies that the authentication type is a simple text password. • State - The current state of the Virtual Router: - Initialize - Master - Backup • Status - The current status of the Virtual Router: - Inactive - Active • Secondary IP Address - A secondary VRRP address configured for the primary VRRP. Displaying Virtual Router Status using the CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Virtual Router Redundancy Protocol Commands Configuring Routing 541