Dell PowerConnect M6220 User's Guide - Page 189

CP Global Configuration From the CP Global Configuration page, you can control the administrative state of the CP feature and configure global settings that affect all captive portals configured on the switch. To configure the global CP settings, click System > Captive Portal > Global Configuration. Figure 6-68. CP Global Configuration The CP Global Configuration page contains the following fields: • Captive Portal - Enable or disable the CP feature on the switch. • CP Global Operational Status - Shows whether the CP feature is enabled. • CP Global Disable Reason - If CP is disabled, this field displays the reason, which can be one of the following: - None - Administrator Disabled - No IPv4 Address - Routing Enabled, but no IPv4 routing interface • Additional HTTP Port - HTTP traffic uses port 80, but you can configure an additional port for HTTP traffic. Enter a port number between 0-65535 (excluding ports 80, 443, and the configured switch management port). • Additional HTTP Secure Port - HTTP traffic over SSL (HTTPS) uses port 443, but you can configure an additional port for HTTPS traffic. Enter a port number between 0-65535 (excluding ports 80, 443, and the configured switch management port). Configuring System Information 187