Dell PowerConnect M6220 User's Guide - Page 715

BSR Candidate Configuration Use this page to configure information to be used if the interface is selected as a bootstrap router. To display the page, click IPv4 Multicast > PIM > BSR Candidate Configuration or IPv6 Multicast > PIM > BSR Candidate Configuration. Figure 12-44. BSR Candidate Configuration The BSR Candidate Configuration page contains the following fields: • Interface - Select the interface for which data is to be displayed. • Hash Mask Length - The CBSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorithm for selecting the RP for a particular group. The valid values are from 0 to 128.The default value is 126. • Priority - The priority value for the local interface as a candidate bootstrap router. The valid values are from 0 to 255.The default value is 0. Configuring the BSR Candidate using the CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • PIM Commands Configuring IP Multicast 713