Dell PowerConnect M6220 User's Guide - Page 651
Auto VoIP Interface Configuration, Quality of Service > Auto VoIP > Interface
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 651 highlights
The Auto VoIP Configuration page contains the following fields: • Auto VoIP Mode - Enables or Disables Auto VoIP mode. The default is Disable. • Traffic Class -Displays the traffic class used for VoIP traffic. Configuring Auto VoIP Using the CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • QoS Commands Auto VoIP Interface Configuration Use the Auto VoIP Interface Configuration page to configure the Auto VoIP settings for each interface. To display the Auto VoIP Configuration page, click Quality of Service > Auto VoIP > Interface Configuration in the navigation menu. Figure 11-22. Auto VoIP Interface Configuration The Auto VoIP Interface Configuration page contains the following fields: • Interface - Lists the interfaces, Unit and Port or LAG, on which Auto VoIP can be configured. • Auto VoIP Mode - Use the mode setting to either Enable or Disable the Auto VoIP mode on the selected interface. The default is Disable. • Traffic Class -Displays the traffic class used for VoIP traffic. Configuring Quality of Service 649