Dell PowerConnect M6220 User's Guide - Page 718
PIM-SM Global Configuration, Admin Mode, Join/Prune Interval secs, Data Threshold Rate Kbps
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 718 highlights
Figure 12-46. PIM-SM Global Configuration The PIM-SM Global Configuration page contains the following fields: • Admin Mode - Select Enable or Disable from the drop-down menu to set the administrative status of PIM-SM on the system. You must enable IGMP before enabling PIM-SM. The default is Disable. • Join/Prune Interval (secs) - Enter the interval between the transmission of PIM-SM Join/Prune messages. The valid values are from 10 to 3600 secs. The default value is 60. • Data Threshold Rate (Kbps) - Enter the minimum source data rate in K bits/second above which the last-hop router switches to a source-specific shortest path tree. The valid values are from 0 to 2000 K bits/sec. The default value is 50. • Register Threshold Rate (Kbps) - Enter the minimum source data rate in K bits/second above which the Rendezvous Point router switches to a source-specific shortest path tree. The valid values are from 0 to 2000 K bits/sec. The default value is 50. Configuring PIM-SM 1. Open the PIM-SM Global Configuration page. 2. Set Admin Mode to Enable or Disable, to turn PIM-SM on or off. 3. Modify the remaining fields as needed. 4. Click Apply Changes. 716 Configuring IP Multicast