Dell PowerConnect M6220 User's Guide - Page 663

The Multicast Admin Boundary Configuration page contains the following fields: • Group - Select Create Boundary from the drop-down menu to create a new admin scope boundary, or select one of the existing boundary specifications to display or update its configuration. • Interface - Select the router interface for which the administratively scoped boundary is to be configured. • Group IP - Enter the multicast group address for the start of the range of addresses to be excluded. The address must be in the range of 239.0.0.0 through 239.255.255.255. • Group Mask - Enter the mask to be applied to the multicast group address. The combination of the mask and the Group IP gives the range of administratively scoped addresses for the selected interface. Configuring an Admin Boundary 1. Open the Multicast Admin Boundary Configuration page. 2. Select Create Boundary in the Group IP field to configure a new admin scope boundary, or select one of the existing entries. 3. Modify the remaining fields as needed. 4. Click Apply Changes. The new or modified admin scope boundary is saved, and the device is updated. Configuring an Admin Boundary using the CLI Command For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • Multicast Commands Configuring IP Multicast 661