Dell PowerConnect M6220 User's Guide - Page 580
DHCPv6 Interface Configuration, IPv6 > DHCPv6 > Interface Configuration
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 580 highlights
Displaying the Pool Summary using the CLI Command For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • DHCPv6 Commands DHCPv6 Interface Configuration Use the DHCPv6 Interface Configuration page to configure a DHCPv6 interface. To display the page, click IPv6 > DHCPv6 > Interface Configuration in the tree view. Figure 10-11. DHCPv6 Interface Configuration The DHCPv6 Interface Configuration pages contain the following fields: Interface - Select the interface for which you are configuring DHCPv6 server functionality. Interface Mode - Configure the DHCPv6 mode as either Server or Relay. DHCPv6 server and DHCPv6 relay functions are mutually exclusive. Pool Name - Selects the DHCPv6 pool containing stateless and/or prefix delegation parameters. This field displays when the Interface Mode is Server. Rapid Commit - Rapid commit is an optional parameter. Specified to allow abbreviated exchange between the client and server. This field displays when the Interface Mode is Server. Preference - Selects the preference value used by clients to determine preference between multiple DHCPv6 servers. The values allowed are between 0 to 4294967295. This field displays when the Interface Mode is Server. 578 Configuring IPv6