Dell PowerConnect M6220 User's Guide - Page 695
Version 1 Host Timer, Compatibility, Filter Mode, Displaying Cache Information using the CLI Command
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 695 highlights
• Version 1 Host Timer - The time remaining until the local router assumes that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. When an IGMPv1 membership report is received, this timer is reset to the group membership timer. While this timer is non-zero, the local router ignores any IGMPv2 leave messages for this group that it receives on the selected interface. This field is displayed only if the interface is configured for IGMP version 1. • Version 2 Host Timer - The time remaining until the local router assumes that there are no longer any IGMP version 2 members on the IP subnet attached to this interface. When an IGMPv2 membership report is received, this timer is reset to the group membership timer. While this timer is non-zero, the local router ignores any IGMPv1 and IGMPv3 leave messages for this group that it receives on the selected interface. This field is displayed only if the interface is configured for IGMP version 2. • Compatibility - This parameter shows group compatibility mode (v1, v2 and v3) for this group on the specified interface. • Filter Mode - The source filter mode (Include/Exclude/NA) for the specified group on this interface. When NA mode is active the field is blank. Displaying Cache Information using the CLI Command For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • IGMP Commands Configuring IP Multicast 693