Dell PowerConnect M6220 User's Guide - Page 390
DAI Interface Configuration, Dynamic ARP Inspection Global Configuration
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 390 highlights
The Dynamic ARP Inspection Global Configuration page contains the following fields: • Validate Source MAC - Select the DAI Source MAC Validation Mode for the switch. If you select Enable, Sender MAC validation for the ARP packets will be enabled. The default is Disable. • Validate Destination MAC-Select the DAI Destination MAC Validation Mode for the switch. If you select Enable, Destination MAC validation for the ARP Response packets will be enabled. The default is Disable. • Validate IP-Select the DAI IP Validation Mode for the switch. If you select Enable, IP Address validation for the ARP packets will be enabled. The default is Disable. Configuring Dynamic ARP Inspection With CLI Commands For information about the CLI commands that perform this function, refer to the following chapter in the CLI Reference Guide: • Dynamic ARP Inspection Commands DAI Interface Configuration Use the DAI Interface Configuration page to select the DAI Interface for which information is to be displayed or configured. To display the DAI Interface Configuration page, click Switching > Dynamic ARP Inspection > DAI Interface Configuration in the navigation tree. 388 Configuring Switching Information