Dell PowerConnect M6220 User's Guide - Page 361

Removing a Bridge Multicast Group 1. Open the Bridge Multicast Group page. 2. Select the VLAN ID associated with the bridge multicast group to be removed from the drop-down menu. The Bridge Multicast Address and the assigned ports/LAGs display. 3. Check the Remove check box. 4. Click Apply Changes. The selected bridge multicast group is removed, and the device is updated. Managing Multicast Service Members Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Address Table Commands Bridge Multicast Forward Use the Bridge Multicast Forward page to enable attaching ports or LAGs to a switch that is attached to a neighboring Multicast switch. Once IGMP Snooping is enabled, multicast packets are forwarded to the appropriate port or VLAN. To display the Bridge Multicast Forward page, click Switching > Multicast Support > Bridge Multicast Forward in the tree view. Figure 7-76. Bridge Multicast Forward The Bridge Multicast Forward page contains the following field and two editable tables: • VLAN ID - Selects the VLAN to be affected. Configuring Switching Information 359