Dell PowerConnect M6220 User's Guide - Page 507
Interface Configuration, Apply Changes, Adding an IP Helper Entry to an Interface
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 507 highlights
Adding an IP Helper Entry to an Interface 1. Open the IP Helper Interface Configuration page. 2. Click Add to display the Interface Configuration Add page: Figure 9-26. Add Helper IP Address 3. Select the interface to use for the relay. 4. Select a UDP Destination port name from the menu or enter the UDP Destination Port ID. Select the Default Set to configure for the relay entry for the default set of protocols. NOTE: If the DefaultSet option is specified, the device by default forwards UDP Broadcast packets for the following services: IEN-116 Name Service (port 42), DNS (port 53), NetBIOS Name Server (port 137), NetBIOS Datagram Server (port 138), TACACS Server (Port 49), and Time Service (port 37). 5. Choose whether to discard (True) or keep (False) packets arriving on the given interface with the given destination UDP port. 6. Enter the IP address of the server to which the packets with the given UDP Destination Port will be relayed. 7. Click Apply Changes. The UDP/Helper Relay is added to the interface and the device is updated. Configuring Routing 505