Dell PowerConnect M6220 User's Guide - Page 708
Join/Prune Interval, PIM Interface Summary
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 708 highlights
The PIM Interface Summary page contains the following fields: • Interface - Select the interface for which data is to be displayed. There must be configured at least one router interface before displaying data for a PIM interface, otherwise an error message displays. Interface Parameters fields are: • Admin Mode - Displays the administrative status of PIM for the selected interface. • Protocol State - The operational state of the PIM protocol on this interface. • IP Address - The IP address of the selected interface. • Hello Interval - The frequency (in seconds) at which PIM hello messages are transmitted on the selected interface. • Join/Prune Interval - The frequency (in seconds) at which PIM Join/Prune messages are transmitted on this PIM interface. • DR Priority - Indicates the DR priority on the PIM interface. This field is supported in PIM-SM only. • BSR Border - Specifies the BSR border mode on the PIM interface. This field is not supported for PIM-DM. • Designated Router - The designated router on the selected PIM interface. For point-to-point interfaces, this is 0.0.0.0. Interface Neighbors fields are: • Neighbor Count - The number of PIM neighbors on the selected interface. • Neighbor IP - The IP address of the PIM neighbor for which this entry contains information. • Up Time (hh:mm:ss) - The time since this PIM neighbor (last) became a neighbor of the local router. Expiry Time (hh:mm:ss) - The minimum time remaining before this PIM neighbor is aged out. Displaying PIM-DM Interface Summary using the CLI Command For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • PIM-DM Commands 706 Configuring IP Multicast