Dell PowerConnect M6220 User's Guide - Page 721

PIM-SM Interface Configuration Use the PIM-SM Interface Configuration page to configure PIM-SM for an interface. PIM-SM must be enabled on the PIM-SM Global Configuration page for this interface configuration page to display. To display the page, click Multicast > PIM-SM > Interface Configuration in the tree view. Figure 12-48. PIM-SM Interface Configuration The PIM-SM Interface Configuration page contains the following fields: • Interface - Select the interface for which data is to be displayed or configured. At least one routing interface must exist in order to display or configure data. • Mode - Select Enable or Disable from the drop-down menu to set the administrative status of PIMSM on this interface. The default is Disable. • Hello Interval (secs) - Enter the time in seconds between the transmission of which PIM Hello messages on this interface. The valid values are from 10 to 3600 secs. The default value is 30. • CBSR Preference - Enter the preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface. The valid values are from -1 to 255. The default value is 0. Configuring IP Multicast 719