Dell PowerConnect M6220 User's Guide - Page 365

Modifying IGMP Snooping Settings for Multiple Ports, LAGs, or VLANs 1. Open the General IGMP snooping page. 2. Click Show All. The IGMP Snooping Table displays. 3. Click Edit for each Port, LAG, or VLAN to modify. 4. Edit the IGMP Snooping fields as needed. 5. Click Apply Changes. The IGMP Snooping settings are modified, and the device is updated. Copying IGMP Snooping Settings to Multiple Ports, LAGs, or VLANs 1. Open the General IGMP snooping page. 2. Click Show All. The IGMP Snooping Table displays. 3. Click Copy Parameters From. 4. Select a Unit/Port, LAG, or VLAN to use as the source of the desired parameters. 5. Click Copy To for the Unit/Ports, LAGs, or VLANs that these parameters will be copied to. 6. Click Apply Changes. The IGMP Snooping settings are modified, and the device is updated. Configuring General IGMP Snooping Settings with CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • IGMP Snooping Commands Global Querier Configuration Use the Global Querier Configuration page to configure the parameters for the IGMP Snooping Querier. To display the Global Querier Configuration page, click Switching > Multicast Support > IGMP Snooping > Global Querier Configuration in the tree view. Configuring Switching Information 363