Dell PowerEdge R805 Hardware Owner's Manual (PDF) - Page 102
Removing the Riser 2 Board From the Expansion-Card Bracket
View all Dell PowerEdge R805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Figure 3-18. Removing and Replacing Expansion-Card Riser 2 2 3 1 4 1 expansion-card riser 2 3 pin collars (2) 2 release latches (2) 4 mounting pins (2) Removing the Riser 2 Board From the Expansion-Card Bracket 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 71. 3 Remove any expansion cards from the expansion-card riser 2. See "Removing an Expansion Card" on page 92. 4 Remove expansion-card riser 2. See "Removing Expansion-Card Riser 2" on page 101. 102 Installing System Components
102
Installing System Components
Figure 3-18.
Removing and Replacing Expansion-Card Riser 2
Removing the Riser 2 Board From the Expansion-Card Bracket
1
Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2
Open the system. See "Opening the System" on page 71.
3
Remove any expansion cards from the expansion-card riser 2. See
"Removing an Expansion Card" on page 92.
4
Remove expansion-card riser 2. See "Removing Expansion-Card Riser 2"
on page 101.
1
expansion-card riser 2
2
release latches (2)
3
pin collars (2)
4
mounting pins (2)
1
3
2
4