Dell PowerEdge R805 Hardware Owner's Manual (PDF) - Page 79
Replacing a Power Supply, Route the power cable into the cable retention bracket from the power
View all Dell PowerEdge R805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Figure 3-7. Removing and Installing a Power Supply 1 2 3 1 locking tab 3 power-supply handle 2 cable retention bracket Replacing a Power Supply 1 With the power-supply handle in the extended position, slide the new power supply into the chassis. See Figure 3-7. 2 Rotate the handle down until it is completely flush with the power-supply faceplate and the orange snap engages. See Figure 3-7. 3 Connect the power cable to the power supply. a Route the power cable into the cable retention bracket from the power supply side of the bracket (see Figure 3-7). b Loop the cable from the cable retention bracket up to the power plug at the back of the power supply, and connect the cable. Installing System Components 79
Installing System Components
79
Figure 3-7.
Removing and Installing a Power Supply
Replacing a Power Supply
1
With the power-supply handle in the extended position, slide the new
power supply into the chassis. See Figure 3-7.
2
Rotate the handle down until it is completely flush with the power-supply
faceplate and the orange snap engages. See Figure 3-7.
3
Connect the power cable to the power supply.
a
Route the power cable into the cable retention bracket from the power
supply side of the bracket (see Figure 3-7).
b
Loop the cable from the cable retention bracket up to the power plug
at the back of the power supply, and connect the cable.
1
locking tab
2
cable retention bracket
3
power-supply handle
1
3
2