Dell PowerEdge R805 Hardware Owner's Manual (PDF) - Page 34

Table 1-6. LCD Status Messages (continued) Code Text Causes Corrective Actions I1916 Video Off in ## (LCD lights with a blue or amber background.) The video will be turned off Information only. in xx seconds by the RAC remote user. W1228 ROMB Batt < 24hr Warns predictively that the Replace RAID battery. See RAID battery has less than "RAID Battery" on 24 hours of charge left. page 87. NOTE: For the full name of an abbreviation or acronym used in this table, see the "Glossary" on page 177. Solving Problems Described by LCD Status Messages The code and text on the LCD can often specify a very precise fault condition that is easily corrected. For example, if the code E1418 CPU_1_Presence appears, you know that a microprocessor is not installed in socket 1. In contrast, you might be able to determine the problem if multiple related errors occur. For example, if you receive a series of messages indicating multiple voltage faults, you might determine that the problem is a failing power supply. Removing LCD Status Messages For faults associated with sensors, such as temperature, voltage, fans, and so on, the LCD message is automatically removed when that sensor returns to a normal state. For example, if temperature for a component goes out of range, the LCD displays the fault; when the temperature returns to the acceptable range, the message is removed from the LCD. For other faults, you must take action to remove the message from the display: • Clear the SEL - You can perform this task remotely, but you will lose the event history for the system. • Power cycle - Turn off the system and disconnect it from the electrical outlet; wait approximately ten seconds, reconnect the power cable, and restart the system. 34 About Your System