Dell PowerEdge R805 Hardware Owner's Manual (PDF) - Page 86
Removing a SAS Controller Daughter Card
View all Dell PowerEdge R805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Figure 3-11. SAS Controller Daughter Card Cabling 2 1 3 4 1 SAS controller daughter card 3 SAS_A connector (below BKPLN connector) 2 SAS 0 connector 4 SAS cable (1) 6 For battery-cached SAS RAID controllers, install the RAID battery. See "Installing a RAID Battery" on page 87. Removing a SAS Controller Daughter Card 1 Disconnect the SAS cable from the SAS controller daughter card. 2 Press down on the blue release tab and push the SAS controller daughter card out of the sideplane connector. See Figure 3-10. 3 Remove the card tray from the chassis hooks and lift the card from the system. 4 If applicable, remove the RAID battery from the battery holder. 86 Installing System Components
86
Installing System Components
Figure 3-11.
SAS Controller Daughter Card Cabling
6
For battery-cached SAS RAID controllers, install the RAID battery. See
"Installing a RAID Battery" on page 87.
Removing a SAS Controller Daughter Card
1
Disconnect the SAS cable from the SAS controller daughter card.
2
Press down on the blue release tab and push the SAS controller daughter
card out of the sideplane connector. See Figure 3-10.
3
Remove the card tray from the chassis hooks and lift the card from the
system.
4
If applicable, remove the RAID battery from the battery holder.
1
SAS controller daughter card
2
SAS 0 connector
3
SAS_A connector (below BKPLN
connector)
4
SAS cable (1)
1
4
3
2