Dell PowerEdge R805 Hardware Owner's Manual (PDF) - Page 85
Attach one end of the interface cable to connector 0 on the SAS controller
View all Dell PowerEdge R805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Figure 3-10. Installing a SAS Controller Daughter Card 3 2 1 4 5 6 7 8 1 SAS controller daughter card 2 sideplane 3 SAS controller daughter card socket 4 release tab 5 RAID battery connector (batterycached SAS RAID controller only) 6 cutout 7 SAS cable (1) 8 SAS connector(s) (1 or 2) (only SAS 0 used) 5 Attach one end of the interface cable to connector 0 on the SAS controller and the other end to the backplane SAS connector. See Figure 3-11. NOTE: Be sure to connect the cable according to the connector labels on the cable. The cable is not operational if reversed. Installing System Components 85
Installing System Components
85
Figure 3-10.
Installing a SAS Controller Daughter Card
5
Attach one end of the interface cable to connector 0 on the SAS controller
and the other end to the backplane SAS connector. See Figure 3-11.
NOTE:
Be sure to connect the cable according to the connector labels on the
cable. The cable is not operational if reversed.
1
SAS controller daughter card
2
sideplane
3
SAS controller daughter card socket
4
release tab
5
RAID battery connector (battery-
cached SAS RAID controller only)
6
cutout
7
SAS cable (1)
8
SAS connector(s) (1 or 2) (only SAS 0
used)
2
5
7
4
3
8
1
6