Dell PowerEdge R805 Hardware Owner's Manual (PDF) - Page 97
Fan Brackets, Removing the Fan Brackets
View all Dell PowerEdge R805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Fan Brackets Removing the Fan Brackets CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 71. 3 Remove the fans from the fan bracket. See "Removing a System Fan" on page 82. 4 Remove the expansion cards from riser 2. See "Removing an Expansion Card" on page 92. 5 Remove the expansion-card riser 2. See "Removing Expansion-Card Riser 2" on page 101. 6 Remove all three cooling shrouds. See "Cooling Shrouds" on page 94. 7 For the processor fan bracket only: Remove the SAS controller daughter card. See "Removing a SAS Controller Daughter Card" on page 86. 8 Remove the fan bracket from the system: a Press and hold down on the release latch on the left side of the fan bracket. See Figure 3-16. b Slide the fan bracket toward the release latch to disengage from the system board tray. See Figure 3-16. c Lift the bracket out of the system. Installing System Components 97