Dell PowerEdge R805 Hardware Owner's Manual (PDF) - Page 103
Replacing the Riser 2 Board on the Expansion-Card Bracket
View all Dell PowerEdge R805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Figure 3-19. Removing and Replacing the Riser 2 Board 1 2 5 4 3 1 expansion-card bracket 3 Phillips screw 5 tab hook (4) 2 riser 2 board 4 tab slot (4) 5 Remove the expansion-card riser board: a Using a Phillips screwdriver, remove the securing screw from the assembly. See Figure 3-19. b Slide the riser board off of the four securing tab hooks. c Lift the riser board from the bracket. Replacing the Riser 2 Board on the Expansion-Card Bracket 1 Place the riser board in the expansion-card bracket so that the four tab hooks are fully inserted through the tab slots on the riser board. See Figure 3-19. 2 Slide the riser board into the tab hooks. Installing System Components 103
Installing System Components
103
Figure 3-19.
Removing and Replacing the Riser 2 Board
5
Remove the expansion-card riser board:
a
Using a Phillips screwdriver, remove the securing screw from the
assembly. See Figure 3-19.
b
Slide the riser board off of the four securing tab hooks.
c
Lift the riser board from the bracket.
Replacing the Riser 2 Board on the Expansion-Card Bracket
1
Place the riser board in the expansion-card bracket so that the four tab
hooks are fully inserted through the tab slots on the riser board. See
Figure 3-19.
2
Slide the riser board into the tab hooks.
1
expansion-card bracket
2
riser 2 board
3
Phillips screw
4
tab slot (4)
5
tab hook (4)
3
1
2
5
4