Dell S2810dn Dell Smart Printer Users Guide - Page 115

Reset Defaults Purpose: To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu parameters are reset to their default values. Values: Reset Defaults and restart printer. Power On Wizard Click Start to reset the default setting and restart the printer. Click Start to perform initial setup for the printer. Initialize PrintMeter Purpose: To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to 0. Storage NOTE: Storage feature is available only when RAM Disk is enabled. Purpose: To clear all files stored in the RAM disk. Values: Clear Storage*1 All Clear Click Start to clear all files stored as Secure Print, Proof Print, Private Mail Box Print, and Public Mail Box Print in the RAM disk. Secure Document Click Start to clear all files stored as Secure Print, Proof Print, Private Mail Box Print, and Public Mail Box Print in the RAM disk. Stored Document Click Start to clear all files stored in the RAM disk. *1 This item is available only when RAM Disk is enabled. Non-Dell Toner Purpose: To use toner cartridge of another manufacturer. WARNING: Using a non-Dell toner cartridge may severely damage your printer. The warranty does not cover damages caused by using non-Dell toner cartridges. Adjust Altitude Purpose: To specify the altitude of the location where the printer is installed. The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the location where the printer is being used. StaticMemory Ctr Purpose: To widen the print gap not to leave toner streak on the next page. Dell™ Printer Configuration Web Tool 115