Dell S2810dn Dell Smart Printer Users Guide - Page 127
Purpose, Reset Defaults, Printer Settings, Values, Security, Set Password, SSL/TLS, IPsec
View all Dell S2810dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Group Role Displays the group role of the printer. Device Name Specifies the printer name that identifies the Wi-Fi Direct network with up to 32 alphanumeric characters. Confirm it when selecting the printer name on your Wi-Fi mobile device. WPS Setup Configures the Wi-Fi Direct network using WPS. SSID (Character string Specifies a name to identify the Wi-Fi Direct network. Up to 32 following "DIRECT-**") alphanumeric characters can be entered. "DIRECT-" cannot be changed. Passphrase Displays the passphrase. Confirm it when entering the passphrase into your Wi-Fi mobile device. IP Address Displays the IP address of the Wi-Fi Direct. Subnet Mask Displays the subnet mask. Paired Device Displays the number of the device currently connected to the Wi-Fi Direct network. Current Role Displays the current group role of the printer. Current SSID Displays the current SSID. Confirm it when selecting the Wi-Fi Direct network name on your Wi-Fi mobile device. Reset Print Server Purpose: To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize NVRAM of the printer from Reset Defaults in the Printer Settings menu. Values: Initialize NIC NVRAM Memory and restart printer. Restart Printer Click Start to initialize NVRAM, revert network settings to the factory default settings, and reboot the network capability. Click Start to reboot the printer. Security The Security tab includes Set Password, SSL/TLS, IPsec, 802.1x, and IP Filter (IPv4). Set Password Purpose: To set or change the password that is required to access the setup parameters of the printer from the Dell Printer Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame. NOTE: To restore the password to the default (NULL), initialize the non-volatile memory (NVM). NOTE: You can set the password for access to Admin Settings from Panel Lock in Printer Settings. Values: Administrator Password Re-enter Administrator Password Access denial by the authentication failure of the Administrator Sets the password using up to 128 alphanumeric characters (excluding spaces and colons). Confirms the set password. Sets how many times the failure in administrator authentication is allowed in total. Sets the number from 5 to 255. If you set 0, this mode is disabled. Dell™ Printer Configuration Web Tool 127