Dell S2810dn Dell Smart Printer Users Guide - Page 159

Letterhead 2 Sided Purpose: To specify whether to print on both sides when using letterhead. Values: Disable* Enable Does not print on both sides of letterhead. Prints on both sides of letterhead. Low Toner Alert Msg Purpose: To specify whether to show the alert message when the toner is low. Values: Off Does not show the alert message when the toner is low. On* Shows the alert message when the toner is low. S/W Download Purpose: To enable or disable download of firmware updates. Values: Disable Enable* Disables firmware updates. Enables firmware updates. Use Another Tray Purpose: To change to another paper tray when a paper size runs out in the specified paper tray. Values: Off Does not print on other paper sizes in other paper trays if the paper size specified in the job runs out. On* Shows a message to select another tray when the specified paper runs out in the paper tray. NOTE: If you select another paper tray with paper size smaller than the paper size specified in the job, the parts that do not fit are not printed (print size is not adjusted automatically). Envelope Mode Mismatch Purpose: To specify whether to display the alert window when the print job is started without setting to the envelope mode. Values: Ignore Show Warning* Does not display the alert window and continues the print job on the envelope even if a mismatch is detected in the printer's envelope mode settings. Displays the alert window to confirm whether to hold the print job and change to the envelope mode, or to continue the print job anyway without changing to the envelope mode. Understanding the Printer Menus 159