Dell S2810dn Dell Smart Printer Users Guide - Page 123

Trap Notification 1-4 Trap Address Type Trap Address Port Number Notify Network*2 Select the check boxes to notify trap occurrence. In this case, specify the IP address and IP socket in the following format: IPv4 Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn" is a variable value between 0 and 255. Note that values 127 and 224-254 are not valid for the first three-digits only. IP socket mmmmm is a variable value between 0 and 65535. IPv6 Specify the IP address and IP socket in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each section of "xxxx" is a hexadecimal variable value between 0 and ffff. IP socket mmmmm is a variable value between 0 and 65535. Authenticate Error Trap Select the check box to notify Authenticate Error Trap. *1 The default value can be changed by using Dell Printer Configuration Web Tool. *2 This item is available only when Wi-Fi Direct is set to Enable. SNMP v3 Purpose: To edit the detailed settings of SNMP v3 protocol. To enter this page, click Edit SNMP v3 Properties in the SNMP page. Values: Administrator Account Print Drivers / Remote Client Account Account Enabled Select the check box to enable the administrator account. User Name Enters the user name of the administrator account. Authentication Password Sets the authentication password of the administrator account using 8 to 32 alphanumeric characters. Re-enter Authentication Confirms the set password. Password Privacy Password Sets the privacy password of the administrator account using 8 to 32 alphanumeric characters. Re-enter Privacy Password Confirms the set password. Account Enabled Select the check box to enable the print drivers and remote client account. Reset to default Password Click to reset the password for the print drivers and remote client account to default. Dell™ Printer Configuration Web Tool 123