Dell S2810dn Dell Smart Printer Users Guide - Page 122

Bonjour (mDNS) Purpose: To configure the detailed settings of Bonjour. Values: Host Name Printer Name Wide-Area Bonjour Sets the host name up to 63 alphanumeric characters and "-" (dash). Sets the printer name up to 63 alphanumeric characters and symbol sets. Select the check box to enable the Wide-Area Bonjour protocol. SNMP Purpose: To configure the detailed settings of SNMP. Values: SNMP Configuration Enable SNMP v1/v2c Protocol Edit SNMP v1/v2c Properties Enable SNMP v3 Protocol Edit SNMP v3 Properties Select the check box to enable the SNMP v1/v2c protocol. Click to display the SNMP v1/v2c page and to edit the setting of SNMP v1/v2c protocol from the page. Select the check box to enable the SNMP v3 protocol. Click to display the SNMP v3 page and to edit the setting of SNMP v3 protocol from the page. You can click this item only when SSL communication is enabled. SNMP v1/v2c Purpose: To edit the detailed settings of SNMP v1/v2c protocol. To enter this page, click Edit SNMP v1/v2c Properties in the SNMP page. Values: Community Name Community Name (Read only)*1 Re-enter Community Name (Read only)*1 Community Name (Read/Write)*1 Re-enter Community Name (Read/Write)*1 Community Name (Trap)*1 Re-enter Community Name (Trap)*1 Sets the community name to access (read only) data using up to 31 alphanumeric characters. The default Read Community is public. Enters the community name to access (read only) data again to confirm it. Sets the community name to access (read and write) data using up to 31 alphanumeric characters. The default Read/Write Community is private. Enters the community name to access (read and write) data again to confirm it. Sets the community name used for trap up to 31 alphanumeric characters. The default Trap Community is " " (NULL). Enters the community name used for trap again to confirm it. 122 Dell™ Printer Configuration Web Tool