Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 1047

Version 7.6.1.0 7.5.1.0 pre-6.2.1.1 Description Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The following describes the show mac-address-table command shown in the following example. Column Heading Description VlanId Displays the VLAN ID number. Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format. Type Lists whether the MAC address was manually configured (Static), learned dynamically (Dynamic), or associated with a specific port (Sticky). Interface Displays the interface type and slot/port information. The following abbreviations describe the interface types: • Po = port channel • Gi = gigabit Ethernet • Te = ten-gigabit Ethernet State Lists if the MAC address is in use (Active) or not in use (Inactive). Example Dell(conf)# do show mac-address-table Codes: *N - VLT Peer Synced MAC VlanId Mac Address Type Interface 2 00:00:00:00:00:01 Dynamic (N) 128 Active 2 00:00:00:00:00:02 Dynamic (N) 10 Active 2 00:00:00:00:00:03 Dynamic 100 Active 2 00:00:00:00:00:04 Dynamic 10 Active State Po Po Po Po Usage Information The following describes the show mac-address-table count command shown in the following example. Line Beginning Description With MAC Entries... Displays the number of MAC entries learned per VLAN. Dynamic Address... Lists the number of dynamically learned MAC addresses. Static Address... Lists the number of user-defined MAC addresses. Layer 2 1047