Home » Dell Manuals » Hubs & Switches » Dell S3100 » Manual Viewer

Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 1433

service-policy input

Add to My Manuals
Save this manual to your list of manuals

Page 1433 highlights

Version 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added the kbps option on the C-Series, E-Series, and SSeries. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information On 40-port 10G stack-unit if the traffic is shaped between 64 and 1000 Kbs, for some values, the shaped rate is much less than the value configured.You must configure the peak rate and peak burst size using the same value: kilobits or packets per second. Similarly, you must configure the committed rate and committed burst size with the same measurement. Peak rate refers to the maximum rate for traffic arriving or exiting an interface under normal traffic conditions. Peak burst size indicates the maximum size of unused peak bandwidth that is aggregated. This aggregated bandwidth enables brief durations of burst traffic that exceeds the peak rate and committed burst. Committed rate refers to the guaranteed bandwidth for traffic entering or leaving the interface under normal network conditions. When traffic propagates at an average rate that is less than or equal to the committed rate, it is considered to be green-colored or coded. When the transmitted traffic falls below the committed rate, the bandwidth, which is not used by any traffic that is traversing the network, is aggregated to form the committed burst size. Traffic is considered to be green-colored up to the point at which the unused bandwidth does not exceed the committed burst size. Related Commands • rate shape - shapes traffic output as part of the designated policy. • qos-policy-output - creates a QoS output policy. service-policy input Apply an input policy map to the selected interface. Syntax Parameters service-policy input policy-map-name [layer2] To remove the input policy map from the interface, use the no service-policy input policy-map-name [layer2] command. policy-map-name Enter the name for the policy map in character format (32 characters maximum). You can identify an existing policy map or name one that does not yet exist. Quality of Service (QoS) 1433

Section	Page
Dell Command Line Reference Guide for the S3100 Series 9.8(2.0)	3
About this Guide	43
Objectives	43
Audience	43
Conventions	43
CLI Basics	45
Accessing the Command Line	45
Multiple Configuration Users	45
Obtaining Help	46
Navigating the CLI	48
Using the Keyword no Command	48
Filtering show Commands	48
Enabling Software Features on Devices Using a Command Option	49
feature vrf	50
show feature	51
Command Modes	51
File Management	61
boot system	61
cd	63
copy	63
delete	66
dir	68
format	69
fsck flash	70
mkdir	71
mount nfs	72
rmdir	72
upgrade system	73
rename	75
restore factory-defaults	75
show boot system	79
show bootvar	80
show file-systems	81
show os-version	82
show running-config	84
show startup-config	88
show version	89
upgrade	91
Control and Monitoring	93
banner exec	93
banner login	94
banner motd	96
cam-acl	97
cam-acl-vlan	99
clear line	101
configure	102
disable	103
do	104
enable	105
enable optic-info-update interval	106
end	107
exec-timeout	108
exit	109
ftp-server enable	111
ftp-server topdir	112
ftp-server username	113
hostname	114
ip http source-interface	115
ip http vrf	116
ip ftp password	116
ip ftp source-interface	117
ip ftp username	119
ip ftp vrf	120
ip telnet server enable	121
ip telnet server vrf	121
ip telnet source-interface	122
ip telnet vrf	124
ip tftp source-interface	125
ip tftp vrf	126
line	127
login concurrent-session	128
login statistics	130
motd-banner	131
ping	132
reload	136
send	137
service timestamps	138
show alarms	139
show cam-acl-vlan	141
show command-history	141
show command-tree	143
show cpu-traffic-stats	144
show debugging	146
show environment	147
show inventory	149
show login statistics	150
show memory	153
show processes cpu	154
show processes ipc flow-control	158
show processes memory	160
show software ifm	163
show system	164
show tech-support	168
ssh-peer-stack-unit	171
telnet	172
telnet-peer-stack-unit	174
terminal length	174
traceroute	175
undebug all	177
virtual-ip	178
write	179
802.1ag	181
ccm disable	181
ccm transmit-interval	181
clear ethernet cfm traceroute-cache	182
database hold-time	183
disable	183
domain	184
ethernet cfm	184
ethernet cfm mep	185
ethernet cfm mip	186
mep cross-check	187
mep cross-check enable	187
mep cross-check start-delay	188
ping ethernet	189
show ethernet cfm domain	189
show ethernet cfm maintenance-points local	190
show ethernet cfm maintenance-points remote	191
show ethernet cfm mipbd	192
show ethernet cfm statistics	193
show ethernet cfm port-statistics	194
show ethernet cfm traceroute-cache	195
service	196
traceroute cache hold-time	196
traceroute cache size	197
traceroute ethernet	198
802.1X	199
debug dot1x	200
dot1x auth-fail-vlan	200
dot1x auth-server	202
dot1x auth-type mab-only	202
dot1x authentication (Configuration)	203
dot1x authentication (Interface)	204
dot1x guest-vlan	205
dot1x host-mode	206
dot1x mac-auth-bypass	207
dot1x max-eap-req	208
dot1x max-supplicants	209
dot1x port-control	210
dot1x quiet-period	211
dot1x reauthentication	212
dot1x reauth-max	212
dot1x server-timeout	213
dot1x supplicant-timeout	214
dot1x tx-period	215
show dot1x cos-mapping interface	216
show dot1x interface	218
Access Control Lists (ACL)	221
Commands Common to all ACL Types	221
remark	221
show config	223
Common IP ACL Commands	224
access-class	224
clear counters ip access-group	225
ip access-group	226
ip control-plane egress-filter	228
show ip accounting access-list	228
show ip access-lists	230
Standard IP ACL Commands	231
deny	231
ip access-list standard	233
permit	234
resequence access-list	236
seq	237
Extended IP ACL Commands	239
deny	240
deny icmp	242
deny tcp	244
deny udp	247
ip access-list extended	250
permit	251
permit tcp	253
permit udp	257
resequence access-list	260
seq	261
Common MAC Access List Commands	264
clear counters mac access-group	264
mac access-group	265
show mac access-lists	267
show mac accounting access-list	268
Standard MAC ACL Commands	269
deny	269
mac access-list standard	271
permit	272
seq	274
Extended MAC ACL Commands	276
deny	276
mac access-list extended	278
permit	280
IP Prefix List Commands	282
clear ip prefix-list	282
deny	283
ip prefix-list	284
seq	285
show config	286
show ip prefix-list detail	287
show ip prefix-list summary	288
Route Map Commands	289
continue	289
description	291
match as-path	292
match community	293
match interface	293
match ip address	295
match ip next-hop	296
match ip route-source	297
match metric	298
match origin	299
match route-type	300
match tag	301
route-map	302
set as-path	303
set automatic-tag	304
set comm-list delete	305
set community	306
set level	308
set local-preference	309
set metric	310
set metric-type	311
set next-hop	312
set origin	313
set tag	314
set weight	315
show config	316
show route-map	317
AS-Path Commands	318
ip as-path access-list	318
show ip as-path-access-lists	319
IP Community List Commands	320
ip community-list	320
show ip community-lists	321
deny (for Standard IP ACLs)	322
deny (for Extended IP ACLs)	323
seq (for Standard IPv4 ACLs)	325
deny tcp (for Extended IP ACLs)	327
deny udp (for Extended IP ACLs)	329
deny arp (for Extended MAC ACLs)	330
deny icmp (for Extended IP ACLs)	332
deny ether-type (for Extended MAC ACLs)	333
deny (for Standard MAC ACLs)	335
deny (for Extended MAC ACLs)	337
permit (for Standard IP ACLs)	339
permit arp (for Extended MAC ACLs)	340
permit ether-type (for Extended MAC ACLs)	342
permit icmp (for Extended IP ACLs)	344
permit udp (for Extended IP ACLs)	346
permit (for Extended IP ACLs)	347
permit (for Standard MAC ACLs)	349
seq (for Standard MAC ACLs)	351
permit tcp (for Extended IP ACLs)	353
seq arp (for Extended MAC ACLs)	354
seq ether-type (for Extended MAC ACLs)	356
seq (for IP ACLs)	358
seq (for IPv6 ACLs)	360
permit udp (for IPv6 ACLs)	361
permit tcp (for IPv6 ACLs)	363
permit icmp (for IPv6 ACLs)	365
permit (for IPv6 ACLs)	367
deny udp (for IPv6 ACLs)	368
deny tcp (for IPv6 ACLs)	370
deny icmp (for Extended IPv6 ACLs)	372
deny (for IPv6 ACLs)	374
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)	376
member vlan	376
ip access-group	377
show acl-vlan-group	378
show cam-acl-vlan	379
cam-acl-vlan	380
show cam-usage	381
show running config acl-vlan-group	385
acl-vlan-group	386
show acl-vlan-group detail	387
description (ACL VLAN Group)	388
Bidirectional Forwarding Detection (BFD)	390
bfd all-neighbors	390
bfd disable	392
bfd enable (Configuration)	393
bfd enable (Interface)	393
bfd interval	394
bfd neighbor	395
bfd protocol-liveness	396
ip route bfd	397
ipv6 ospf bfd all-neighbors	398
isis bfd all-neighbors	399
neighbor bfd	401
neighbor bfd disable	402
show bfd neighbors	403
vrrp bfd neighbor	405
Border Gateway Protocol	406
BGP IPv4 Commands	406
address-family	406
aggregate-address	408
bgp add-path	409
bgp always-compare-med	410
bgp asnotation	411
bgp bestpath as-path ignore	413
bgp bestpath as-path multipath-relax	413
bgp bestpath med confed	414
bgp bestpath med missing-as-best	415
bgp bestpath router-id ignore	416
bgp client-to-client reflection	416
bgp cluster-id	417
bgp confederation identifier	418
bgp confederation peers	420
bgp connection-retry-timer	421
bgp dampening	422
bgp default local-preference	423
bgp dmzlink-bw	424
bgp enforce-first-as	425
bgp fast-external-fallover	426
bgp four-octet-as-support	427
bgp graceful-restart	428
bgp non-deterministic-med	429
bgp recursive-bgp-next-hop	430
bgp regex-eval-optz-disable	431
bgp router-id	433
clear ip bgp	434
clear ip bgp dampening	435
clear ip bgp flap-statistics	437
clear ip bgp peer-group	439
deny bandwidth	440
debug ip bgp	440
debug ip bgp dampening	442
debug ip bgp events	443
debug ip bgp keepalives	444
debug ip bgp notifications	445
debug ip bgp soft-reconfiguration	446
debug ip bgp updates	447
default-metric	449
description	450
maximum-paths	451
neighbor activate	452
neighbor add-path	453
neighbor advertisement-interval	454
neighbor advertisement-start	455
neighbor allowas-in	455
neighbor default-originate	456
neighbor description	458
neighbor distribute-list	459
neighbor ebgp-multihop	460
neighbor fall-over	461
neighbor local-as	462
neighbor maximum-prefix	463
neighbor password	464
neighbor peer-group (assigning peers)	466
neighbor peer-group (creating group)	468
neighbor peer-group passive	469
neighbor remote-as	470
neighbor remove-private-as	471
neighbor route-map	472
neighbor route-reflector-client	473
neighbor sender-side-loopdetect	475
neighbor send-community	476
neighbor shutdown	477
neighbor soft-reconfiguration inbound	478
neighbor timers	479
neighbor update-source	481
neighbor weight	482
network	483
network backdoor	485
permit bandwidth	486
redistribute	486
redistribute ospf	488
router bgp	489
set extcommunity bandwidth	490
show capture bgp-pdu neighbor	491
show config	492
show ip bgp	493
show ip bgp cluster-list	495
show ip bgp community	498
show ip bgp community-list	501
show ip bgp dampened-paths	503
show ip bgp detail	504
show ip bgp extcommunity-list	507
show ip bgp filter-list	508
show ip bgp flap-statistics	510
show ip bgp inconsistent-as	513
show ip bgp neighbors	515
show ip bgp next-hop	519
show ip bgp paths	520
show ip bgp paths community	522
show ip bgp peer-group	523
show ip bgp regexp	525
show ip bgp summary	527
show running-config bgp	531
timers bgp	532
MBGP Commands	533
debug ip bgp dampening	533
distance bgp	534
show ip bgp dampened-paths	535
BGP Extended Communities (RFC 4360)	537
set extcommunity rt	537
set extcommunity soo	538
show ip bgp paths extcommunity	540
show ip extcommunity-list	541
IPv6 BGP Commands	542
clear ip bgp ipv6 unicast soft	542
debug ip bgp ipv6 unicast soft-reconfiguration	543
ipv6 prefix-list	544
neighbor soft-reconfiguration inbound	544
show ipv6 prefix-list	545
IPv6 MBGP Commands	546
show ipv6 mbgproutes	546
Content Addressable Memory (CAM)	548
CAM Profile Commands	549
cam-acl (Configuration)	549
cam-acl-egress	553
cam-optimization	553
show cam-acl	554
test cam-usage	556
Control Plane Policing (CoPP)	558
control-plane-cpuqos	558
service-policy rate-limit-cpu-queues	559
service-policy rate-limit-protocols	560
ip unknown-unicast	561
ipv6 unknown-unicast	561
show cpu-queue rate cp	562
show ip protocol-queue-mapping	563
show ipv6 protocol-queue-mapping	564
show mac protocol-queue-mapping	565
Debugging and Diagnostics	567
Diagnostics and Monitoring Commands	567
logging coredump stack-unit	567
Offline Diagnostic Commands	568
diag stack-unit	568
offline stack-unit	570
online stack-unit	571
Hardware Commands	572
clear hardware stack-unit	572
clear hardware system-flow	573
clear hardware vlan-counters	574
hardware watchdog	574
show hardware mac	575
show hardware ip	576
show hardware stack-unit	577
show hardware buffer interface	586
show hardware counters interface	588
show hardware buffer-stats-snapshot	589
show hardware stack-unit buffer-stats-snapshot (Total Buffer Information)	591
show hardware system-flow	593
show hardware vlan-counters	595
show hardware drops	596
Dynamic Host Configuration Protocol (DHCP)	599
Commands to Configure the System to be a DHCP Server	599
clear ip dhcp	599
debug ip dhcp server	600
debug ipv6 dhcp	601
default-router	601
disable	602
dns-server	603
domain-name	603
excluded-address	604
hardware-address	605
host	606
lease	606
netbios-name-server	607
netbios-node-type	608
network	609
pool	609
show ip dhcp binding	610
show ip dhcp configuration	611
show ip dhcp conflict	612
show ip dhcp server	612
Commands to Configure Secure DHCP	613
arp inspection	613
arp inspection-trust	614
clear ip dhcp snooping	615
clear ipv6 dhcp snooping binding	616
ip dhcp relay	617
ip dhcp snooping	617
ipv6 dhcp snooping	618
ipv6 dhcp snooping vlan	619
ip dhcp snooping binding	619
IPv6 DHCP Snooping Binding	621
ip dhcp snooping database	622
ipv6 dhcp snooping database write-delay	622
ip dhcp snooping database renew	623
ipv6 dhcp snooping database renew	624
ip dhcp snooping trust	624
ipv6 dhcp snooping trust	625
ip dhcp source-address-validation	625
ip dhcp relay information-option	626
ip dhcp snooping verify mac-address	627
ipv6 dhcp snooping verify mac-address	628
ip helper-address	628
ipv6 helper-address	629
show ip dhcp snooping	630
show ipv6 dhcp snooping	633
Commands to Configure DNS	634
ip name-server	634
ip domain-name	635
ip domain-list	635
ip host	636
clear host	637
Equal Cost Multi-Path (ECMP)	639
ecmp-group	639
hash-algorithm	640
ip ecmp-group	643
ip ecmp weighted	643
link-bundle-monitor enable	644

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1,000
1,001
1,002
1,003
1,004
1,005
1,006
1,007
1,008
1,009
1,010
1,011
1,012
1,013
1,014
1,015
1,016
1,017
1,018
1,019
1,020
1,021
1,022
1,023
1,024
1,025
1,026
1,027
1,028
1,029
1,030
1,031
1,032
1,033
1,034
1,035
1,036
1,037
1,038
1,039
1,040
1,041
1,042
1,043
1,044
1,045
1,046
1,047
1,048
1,049
1,050
1,051
1,052
1,053
1,054
1,055
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,067
1,068
1,069
1,070
1,071
1,072
1,073
1,074
1,075
1,076
1,077
1,078
1,079
1,080
1,081
1,082
1,083
1,084
1,085
1,086
1,087
1,088
1,089
1,090
1,091
1,092
1,093
1,094
1,095
1,096
1,097
1,098
1,099
1,100
1,101
1,102
1,103
1,104
1,105
1,106
1,107
1,108
1,109
1,110
1,111
1,112
1,113
1,114
1,115
1,116
1,117
1,118
1,119
1,120
1,121
1,122
1,123
1,124
1,125
1,126
1,127
1,128
1,129
1,130
1,131
1,132
1,133
1,134
1,135
1,136
1,137
1,138
1,139
1,140
1,141
1,142
1,143
1,144
1,145
1,146
1,147
1,148
1,149
1,150
1,151
1,152
1,153
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,184
1,185
1,186
1,187
1,188
1,189
1,190
1,191
1,192
1,193
1,194
1,195
1,196
1,197
1,198
1,199
1,200
1,201
1,202
1,203
1,204
1,205
1,206
1,207
1,208
1,209
1,210
1,211
1,212
1,213
1,214
1,215
1,216
1,217
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,228
1,229
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,247
1,248
1,249
1,250
1,251
1,252
1,253
1,254
1,255
1,256
1,257
1,258
1,259
1,260
1,261
1,262
1,263
1,264
1,265
1,266
1,267
1,268
1,269
1,270
1,271
1,272
1,273
1,274
1,275
1,276
1,277
1,278
1,279
1,280
1,281
1,282
1,283
1,284
1,285
1,286
1,287
1,288
1,289
1,290
1,291
1,292
1,293
1,294
1,295
1,296
1,297
1,298
1,299
1,300
1,301
1,302
1,303
1,304
1,305
1,306
1,307
1,308
1,309
1,310
1,311
1,312
1,313
1,314
1,315
1,316
1,317
1,318
1,319
1,320
1,321
1,322
1,323
1,324
1,325
1,326
1,327
1,328
1,329
1,330
1,331
1,332
1,333
1,334
1,335
1,336
1,337
1,338
1,339
1,340
1,341
1,342
1,343
1,344
1,345
1,346
1,347
1,348
1,349
1,350
1,351
1,352
1,353
1,354
1,355
1,356
1,357
1,358
1,359
1,360
1,361
1,362
1,363
1,364
1,365
1,366
1,367
1,368
1,369
1,370
1,371
1,372
1,373
1,374
1,375
1,376
1,377
1,378
1,379
1,380
1,381
1,382
1,383
1,384
1,385
1,386
1,387
1,388
1,389
1,390
1,391
1,392
1,393
1,394
1,395
1,396
1,397
1,398
1,399
1,400
1,401
1,402
1,403
1,404
1,405
1,406
1,407
1,408
1,409
1,410
1,411
1,412
1,413
1,414
1,415
1,416
1,417
1,418
1,419
1,420
1,421
1,422
1,423
1,424
1,425
1,426
1,427
1,428
1,429
1,430
1,431
1,432
1,433
1,434
1,435
1,436
1,437
1,438
1,439
1,440
1,441
1,442
1,443
1,444
1,445
1,446
1,447
1,448
1,449
1,450
1,451
1,452
1,453
1,454
1,455
1,456
1,457
1,458
1,459
1,460
1,461
1,462
1,463
1,464
1,465
1,466
1,467
1,468
1,469
1,470
1,471
1,472
1,473
1,474
1,475
1,476
1,477
1,478
1,479
1,480
1,481
1,482
1,483
1,484
1,485
1,486
1,487
1,488
1,489
1,490
1,491
1,492
1,493
1,494
1,495
1,496
1,497
1,498
1,499
1,500
1,501
1,502
1,503
1,504
1,505
1,506
1,507
1,508
1,509
1,510
1,511
1,512
1,513
1,514
1,515
1,516
1,517
1,518
1,519
1,520
1,521
1,522
1,523
1,524
1,525
1,526
1,527
1,528
1,529
1,530
1,531
1,532
1,533
1,534
1,535
1,536
1,537
1,538
1,539
1,540
1,541
1,542
1,543
1,544
1,545
1,546
1,547
1,548
1,549
1,550
1,551
1,552
1,553
1,554
1,555
1,556
1,557
1,558
1,559
1,560
1,561
1,562
1,563
1,564
1,565
1,566
1,567
1,568
1,569
1,570
1,571
1,572
1,573
1,574
1,575
1,576
1,577
1,578
1,579
1,580
1,581
1,582
1,583
1,584
1,585
1,586
1,587
1,588
1,589
1,590
1,591
1,592
1,593
1,594
1,595
1,596
1,597
1,598
1,599
1,600
1,601
1,602
1,603
1,604
1,605
1,606
1,607
1,608
1,609
1,610
1,611
1,612
1,613
1,614
1,615
1,616
1,617
1,618
1,619
1,620
1,621
1,622
1,623
1,624
1,625
1,626
1,627
1,628
1,629
1,630
1,631
1,632
1,633
1,634
1,635
1,636
1,637
1,638
1,639
1,640
1,641
1,642
1,643
1,644
1,645
1,646
1,647
1,648
1,649
1,650
1,651
1,652
1,653
1,654
1,655
1,656
1,657
1,658
1,659
1,660
1,661
1,662
1,663
1,664
1,665
1,666
1,667
1,668
1,669
1,670
1,671
1,672
1,673
1,674
1,675
1,676
1,677
1,678
1,679
1,680
1,681
1,682
1,683
1,684
1,685
1,686
1,687
1,688
1,689
1,690
1,691
1,692
1,693
1,694
1,695
1,696
1,697
1,698
1,699
1,700
1,701
1,702
1,703
1,704
1,705
1,706
1,707
1,708
1,709
1,710
1,711
1,712
1,713
1,714
1,715
1,716
1,717
1,718
1,719
1,720
1,721
1,722
1,723
1,724
1,725
1,726
1,727
1,728
1,729
1,730
1,731
1,732
1,733
1,734
1,735
1,736
1,737
1,738
1,739
1,740
1,741
1,742
1,743
1,744
1,745
1,746
1,747
1,748
1,749
1,750
1,751
1,752
1,753
1,754
1,755
1,756
1,757
1,758
1,759
1,760
1,761
1,762
1,763
1,764
1,765
1,766
1,767
1,768
1,769
1,770
1,771
1,772
1,773
1,774
1,775
1,776
1,777
1,778
1,779
1,780
1,781
1,782
1,783
1,784
1,785
1,786
1,787
1,788
1,789
1,790
1,791
1,792
1,793
1,794
1,795
1,796
1,797
1,798
1,799
1,800
1,801
1,802
1,803
1,804
1,805
1,806
1,807
1,808
1,809
1,810
1,811
1,812
1,813
1,814
1,815
1,816
1,817
1,818
1,819
1,820
1,821
1,822
1,823
1,824
1,825
1,826
1,827
1,828
1,829
1,830
1,831
1,832
1,833
1,834
1,835
1,836
1,837
1,838
1,839
1,840
1,841
1,842
1,843
1,844
1,845
1,846
1,847
1,848
1,849
1,850
1,851
1,852
1,853
1,854
1,855
1,856
1,857
1,858
1,859
1,860
1,861
1,862
1,863
1,864
1,865
1,866
1,867
1,868
1,869
1,870
1,871
1,872
1,873
1,874
1,875
1,876
1,877

Match case Limit results 1 per page

Version

Description

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

8.2.1.0

Added the kbps option on the C-Series, E-Series, and S-

Series.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

6.1.1.1

Introduced on the E-Series.

Usage Information

On 40-port 10G stack-unit if the traffic is shaped between 64 and 1000 Kbs, for

some values, the shaped rate is much less than the value configured.You must

configure the peak rate and peak burst size using the same value: kilobits or

packets per second. Similarly, you must configure the committed rate and

committed burst size with the same measurement. Peak rate refers to the

maximum rate for traffic arriving or exiting an interface under normal traffic

conditions. Peak burst size indicates the maximum size of unused peak bandwidth

that is aggregated. This aggregated bandwidth enables brief durations of burst

traffic that exceeds the peak rate and committed burst. Committed rate refers to

the guaranteed bandwidth for traffic entering or leaving the interface under normal

network conditions. When traffic propagates at an average rate that is less than or

equal to the committed rate, it is considered to be green-colored or coded. When

the transmitted traffic falls below the committed rate, the bandwidth, which is not

used by any traffic that is traversing the network, is aggregated to form the

committed burst size. Traffic is considered to be green-colored up to the point at

which the unused bandwidth does not exceed the committed burst size.

Commands

•

rate shape

— shapes traffic output as part of the designated policy.

•

qos-policy-output

— creates a QoS output policy.

service-policy input

Apply an input policy map to the selected interface.

Syntax

service-policy input

policy-map-name

[layer2]

To remove the input policy map from the interface, use the

no service-policy

input policy-map-name [layer2]

command.

Parameters

policy-map-name

Enter the name for the policy map in character format (32

characters maximum). You can identify an existing policy

map or name one that does not yet exist.

Quality of Service (QoS)

1433