Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 820

match 2 tcp a::1 /128 0 a::2 /128 21 match 3 tcp a::1 /128 21 a::2 /128 0 match 4 tcp 1.1.1.1 /32 0 1.1.1.2 /32 23 match 5 tcp 1.1.1.1 /32 23 1.1.1.2 /32 0 match 6 tcp 1.1.1.1 /32 0 1.1.1.2 /32 21 match 7 tcp 1.1.1.1 /32 21 1.1.1.2 /32 0 session-key Specify the session keys used in the crypto policy entry. Syntax session-key {inbound | outbound} {ah spi hex-key-string | esp spi encrypt hex-key-string auth hex-key-string To delete the session key information from the crypto policy, use the no session-key {inbound | outbound} {ah | esp} command. Parameters name inbound outbound ah esp spi hex-key-string encrypt auth Enter the name for the transform set. Specify the inbound session key for IPSec. Specify the outbound session key for IPSec. Use the AH protocol when you select the AH transform set in the crypto policy. Use the ESP protocol when you select the ESP transform set in the crypto policy. Enter the security parameter index number. Enter the session key in hex format (a string of 8, 16, or 20 bytes). For DES algorithms, specify at least 16 bytes per key. For SHA algorithms, specify at least 20 bytes per key. Indicates the ESP encryption transform set key string. Indicates the ESP authentication transform set key string. Defaults None Command Modes CONF-CRYPTO-POLICY Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) Description Introduced on the S3100 series. Introduced on the S4048-ON. 820 Internet Protocol Security (IPSec)