Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 1288

Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.2(1.0) 9.1.(0.0) 8.3.19.0 7.4.1.0 Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the Z9500. Introduced on the S4810 and Z9000. Introduced on the S4820T. Introduced on the E-Series and C-Series. ipv6 ospf authentication Configure an IPsec authentication policy for OSPFv3 packets on an IPv6 interface. Syntax Parameters Defaults ipv6 ospf authentication {null | ipsec spi number {MD5 | SHA1} [key-encryption-type] key}} null ipsec spi number MD5 | SHA1 Causes an authentication policy configured for the area to not be inherited on the interface. Security Policy index (SPI) value that identifies an IPsec security policy. The range is from 256 to 4294967295. Authentication type: Message Digest 5 (MD5) or Secure Hash Algorithm 1 (SHA-1). key-encryptiontype (OPTIONAL) Specifies if the key is encrypted. Valid values: 0 (key is not encrypted) or 7 (key is encrypted). key Text string used in authentication. For MD5 authentication, the key must be 32 hex digits (nonencrypted) or 64 hex digits (encrypted). For SHA-1 authentication, the key must be 40 hex digits (non-encrypted) or 80 hex digits (encrypted). Not configured. 1288 Open Shortest Path First (OSPFv2 and OSPFv3)