Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 586

show hardware buffer interface Display buffer statistics for a specific interface. Syntax show hardware buffer interface interface{priority-group { id | all } | queue { id| all} ] buffer-info Parameters interface interface Enter any of the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. priority-group queue buffer-info Enter the keyword priority-group followed by id for specific priority-group or keyword all. Enter the keyword queue followed by id for specific queue or keyword all. To display total buffer information for the interface, enter the keywords buffer-info. Command Modes EXEC EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.8(0.0) Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S4810, S4820T, S5000, S6000, S6000- ON, Z9000, and Z9500. Example displaying Dell# show hardware buffer interface gigabitethernet 1/1 buffer-info total-buffer ----- Buffer Stats for Interface Gi 1/1 ----- information for the Maximum Shared Limit for the Interface: 38336 interface Default Packet Buffer allocate for the Interface: 120 Used Packet Buffer for the Interface: 0 Example displaying Dell# show hardware buffer interface gigabitethernet 1/1 priority-group priority-group 0 buffer-info range ----- Buffer stats for unit: 0 port: 1 (interface Gi 1/1) ----- 586 Debugging and Diagnostics