Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 928

distance tag value permanent weight weightvalue NOTE: The :: notation specifies successive hexadecimal fields of zeros. (OPTIONAL) Enter a number as the metric distance assigned to the route. The range is from 1 to 255. (OPTIONAL) Enter the keyword tag then a tag value number. The range is from 1 to 4294967295. (OPTIONAL) Enter the keyword permanent to specify that the route is not to be removed, even if the interface assigned to that route goes down. NOTE: If you disable the interface with an IPv6 address associated with the keyword permanent, the route disappears from the routing table. Enter the keyword weight followed by a weight value. The range is from 0 to 255. NOTE: Weight for a static route can be added only for the destination address and not for the route pointing to destination a interface. Defaults None Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.2(1.0) 9.0.0.0 8.3.19.0 8.3.7.0 8.5.1.0 8.2.1.0 7.8.1.0 7.4.1.0 Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4820T. Introduced on the S4810. Added support for 4-port 40G line cards on the E-Series. Introduced on the E-Series. Introduced on the C-Series and S-Series. Introduced on the E-Series. 928 IPv6 Basics