Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 1667

write name notify name access accesslist-name ipv6 access-listname access-list-name ipv6 access-listname default is GlobalView and is assumed to be every object belonging to the internet (1.3.6.1) OID space. (OPTIONAL) Enter the keyword write then a name (a string of up to 20 characters long) as the write view name. (OPTIONAL) Enter the keyword notify then a name (a string of up to 20 characters long) as the notify view name. (Optional) Enter the standard IPv4 access list name (a string up to 16 characters long). (Optional) Enter the keyword ipv6 then the IPv6 access list name (a string up to 16 characters long). (Optional) Enter both an IPv4 and IPv6 access list name. Defaults As above. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.10.2 8.3.7.0 7.6.1.0 7.5.1.0 E-Series legacy command Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Added support for the access parameter. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information The following example specifies the group named harig as a version 3 user requiring both authentication and encryption and read access limited to the read named rview. Simple Network Management Protocol (SNMP) and Syslog 1667