Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 731

flowcontrol Control how the system responds to and generates 802.3x pause frames. Syntax flowcontrol rx {off | on} tx {off | on} [negotiate | pausethreshold value | resume-offset value] To return to the default, use the no form of this command. Parameters rx on rx off tx on tx off pause-threshold resume-offset Enter the keywords rx on to process the received flow control frames on this port. Enter the keywords rx off to ignore the received flow control frames on this port. Enter the keywords tx on to send control frames from this port to the connected device when a higher rate of traffic is received. Enter the keywords tx off so that flow control frames are not sent from this port to the connected device when a higher rate of traffic is received. Enter the buffer threshold limit for generating PAUSE frames. Enter the offset value for generating PAUSE frames to resume traffic. Defaults Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 Description Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Interfaces 731