Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 1273

Version 7.5.1.0 pre-6.1.1.1 Description Introduced on the C-Series. Introduced on the E-Series. Usage Information The area range command summarizes routes for the different areas. With the not-advertise parameter configured, you can use this command to filter out some external routes. For example, if you want to redistribute static routes to OSPF, but you don't want OSPF to advertise routes with prefix 1.1.0.0, you can configure the summary-address 1.1.0.0 255.255.0.0 not-advertise to filter out all the routes fall in range 1.1.0.0/16. Related Commands • area range - summarize routes within an area. timers spf Set the time interval between when the switch receives a topology change and starts a shortest path first (SPF) calculation. Syntax timers spf delay holdtime To return to the default, use the no timers spf command. Parameters delay holdtime Enter a number as the delay. The range is from 0 to 4294967295. The default is 5 seconds. Enter a number as the hold time. The range is from 0 to 4294967295. The default is 10 seconds. Defaults • delay = 5 seconds • holdtime = 10 seconds Command Modes ROUTER OSPF Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Open Shortest Path First (OSPFv2 and OSPFv3) 1273