Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 1150

36 Neighbor Discovery Protocol (NDP) The neighbor discovery protocol for IPv6 is defined in RFC 2461 as part of the Stateless Address Autoconfiguration protocol. It replaces the Address Resolution Protocol used with IPv4. NDP defines mechanisms for solving the following problems: • Router discovery - hosts can locate routers residing on a link • Prefix discovery - hosts can discover address prefixes for the link • Parameter discovery • Address autoconfiguration - configuration of addresses for an interface • Address resolution - mapping from IP address to link-layer address • Next-hop determination • Neighbor unreachability detection (NUD) - determine that a neighbor is no longer reachable on the link. • Duplicate address detection (DAD) - allow a node to check whether a proposed address is already in use. • Redirect - the router can inform a node about a better first-hop. NDP uses the following five ICMPv6 packet types in its implementation: • Router Solicitation • Router Advertisement • Neighbor Solicitation • Neighbor Advertisement • Redirect clear ipv6 neighbors Delete all entries in the IPv6 neighbor discovery cache or neighbors of a specific interface. Static entries are not removed using this command. Syntax Parameters clear ipv6 neighbors [ipv6-address | interface] ipv6-address Enter the IPv6 address of the neighbor in the x:x:x:x::x format to remove a specific IPv6 neighbor. 1150 Neighbor Discovery Protocol (NDP)