Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 896

Example Related Commands Column Heading Description configured in the Dell Networking OS, this line does not appear. Dell> show ip route summary Route Source Active Routes Non-active Routes connected 17 0 static 3 0 ospf 100 1368 2 Intra-area: 762 Inter-area: 1 External-1: 600 External-2: 5 Total 1388 2 Total 1388 active route(s) using 222440 bytes Total 2 non-active route(s) using 128 bytes Dell> • show ip route - display information about the routes found in the switch. show ip traffic View IP, ICMP, UDP, TCP and ARP traffic statistics. Syntax show ip traffic [all | cp | rp1 | rp2] NOTE: These options are supported only on the E-Series. Parameters all cp rp1 rp2 (OPTIONAL) Enter the keyword all to view statistics from all processors. If you do not enter a keyword, you also view all statistics from all processors. (OPTIONAL) Enter the keyword cp to view only statistics from the Control Processor. (OPTIONAL) Enter the keyword rp1 to view only the statistics from Route Processor 1. (OPTIONAL) Enter the keyword rp2 to view only the statistics from Route Processor 2. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. 896 IPv4 Routing