Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 1552

Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 pre-6.1.1.0 Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Dell Networking OS prompts users for these passwords when the method for authentication or authorization used is "line". Related Commands • enable password - sets the password for the enable command. • login authentication - configures an authentication method to log in to the switch. • service password-encryption - encrypts all passwords configured in Dell Networking OS. • radius-server key - configures a key for all RADIUS communications between the switch and the RADIUS host server. • tacacs-server key - configures a key for communication between a TACACS+ server and client. • username - establishes an authentication system based on user names. password-attributes Configure the password attributes (strong password). Syntax password-attributes [min-length number] [max-retry number] [lockout-period minutes][character-restriction [upper number] [lower number] [numeric number] [special-char number]] To return to the default, use the no password-attributes [min-length number] [max-retry number] [lockout-period minutes] [characterrestriction [upper number] [lower number] [numeric number] [special-char number]] command. Parameters min-length number (OPTIONAL) Enter the keywords min-length then the number of characters. The range is from 0 to 32 characters. 1552 Security