Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 279

Defaults None Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.10.0 8.1.1.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up to 16 characters long. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The number of entries allowed per ACL is hardware-dependent. For detailed specifications about entries allowed per ACL, refer to your line card documentation. Prior to 7.8.1.0, names are up to 16 characters long. Example Dell(conf)# mac-access-list access-list extended TestMATExt Dell(config-ext-macl)# remark 5 IPv4 Dell(config-ext-macl)# seq 10 permit any any ev2 eq 800 count bytes Dell(config-ext-macl)# remark 15 ARP Dell(config-ext-macl)# seq 20 permit any any ev2 eq 806 count bytes Dell(config-ext-macl)# remark 25 IPv6 Dell(config-ext-macl)# seq 30 permit any any ev2 eq 86dd count bytes Dell(config-ext-macl)# seq 40 permit any any count bytes Dell(config-ext-macl)# exit Dell(conf)# do show mac accounting access-list snickers interface gig 1/17 in Extended mac access-list snickers on GigabitEthernet 1/17 Access Control Lists (ACL) 279