Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 926

no-rtr-address off-link valid-lifetime | infinite preferred-lifetime | infinite Enter the keyword no-rtr-address to exclude the full router address from router advertisements (the R bit is not set). Enter the keywords off-link to advertise the prefix without stating to recipients that the prefix is either on-link or off-link. Enter the amount of time that the prefix is advertised, or enter infinite for an unlimited amount of time. The range is from 0 to 4294967295. The default is 2592000. The maximum value means that the preferred lifetime does not expire for the valid-life time parameter. Enter the amount of time that the prefix is preferred, or enter infinite for an unlimited amount of time. The range is from 0 to 4294967295. The default is 604800. The maximum value means that the preferred lifetime and does not expire. Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.3.2.0 Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series, C-Series, and S-Series. Usage Information By default, all prefixes configured as addresses on the interface are advertised. This command allows control over the individual parameters per prefix; you can use the default keyword to use the default parameters for all prefixes. If a prefix has been configured with lifetime parameter values, the default values cannot be applied using the ipv6 nd prefix default no-autoconfig command. 926 IPv6 Basics