Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 1076

advertise management-tlv Advertise management TLVs (Type, Length, Value). Syntax advertise management-tlv {management-address | systemcapabilities | system-description | system-name} To remove advertised management TLVs, use the no advertise managementtlv {management-address | system-capabilities | systemdescription | system-name} command. Parameters managementaddress systemcapabilities systemdescription system-name Enter the keyword management-address to advertise the management IP address TLVs to the LLDP peer. Enter the keywords system-capabilities to advertise the system capabilities TLVs to the LLDP peer. Enter the keywords system-description to advertise the system description TLVs to the LLDP peer. Enter the keywords system-name to advertise the system name TLVs to the LLDP peer. Defaults None Command Modes CONFIGURATION (conf-lldp) Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.2(1.0) 9.1.(0.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.7.1.0 7.6.1.0 7.4.1.0 Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the Z9500. Modified to support management-address parameter. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. 1076 Link Layer Discovery Protocol (LLDP)