Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 302

Related Commands Version 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 pre-6.1.1.0 Description Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. • match interface - redistribute routes that match the next-hop interface. • match ip address - redistribute routes that match an IP address. • match ip next-hop - redistribute routes that match the next-hop IP address. • match ip route-source - redistribute routes that match routes advertised by other routers. • match metric - redistribute routes that match a specific metric. • match route-type - redistribute routes that match a route type. route-map Enable a route map statement and configure its action and sequence number. This command also places you in ROUTE-MAP mode. Syntax route-map map-name [permit | deny] [sequence-number] To delete a route map, use the no route-map map-name [permit | deny] [sequence-number] command. Parameters map-name permit deny sequencenumber Enter a text string of up to 140 characters to name the route map for easy identification. (OPTIONAL) Enter the keyword permit to set the route map default as permit. If you do not specify a keyword, the default is permit. (OPTIONAL) Enter the keyword deny to set the route map default as deny. (OPTIONAL) Enter a number to identify the route map for editing and sequencing with other route maps. You are prompted for a sequence number if there are multiple instances of the route map. The range is from 1 to 65535. Defaults Not configured. 302 Access Control Lists (ACL)