Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 61

3 File Management This section contains command line interface (CLI) commands needed to manage the configuration files, as well as other file management commands. boot system Specify the location where the Dell Networking OS image used to boot the system is stored. Syntax boot system {gateway ip-address | stack-unit {stack-unit-number | all} {default | primary | secondary} {ftp: | nfsmount: | system: {A: | B: | bmp-boot} | tftp: | usbflash:}} To return to the default boot sequence, use the no boot system command. Parameters gateway ip-address stack-unit all stack-unitnumber default primary secondary system: ftp: nfsmount Enter the IP address of the default next-hop gateway for the management subnet. Enter an IP address in dotted decimal format. Enter the stack-unit number for the master switch. Enter the keyword all for all the stack units. Enter the stack-unit number. The range is from 1 to 6. Enter the keyword default to specify the default Dell Networking OS image. Enter the keyword primary to specify the primary Dell Networking OS image. Enter the keyword secondary to specify the secondary Dell Networking OS image. Enter the keyword system: to use the system image file URL (system). Enter the keyword FTP: to retrieve the image from an FTP server. ftp://userid:password@hostip/filepath. Enter the keyword nfsmount: to retrieve the image from a mounted NFS file system. nfsmount://filepath File Management 61