Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 651

ssh Open an SSH connection specifying the hostname, username, port number, and version of the SSH client. Syntax Parameters ssh {hostname|ipv4 address|ipv6 address} [-c encryption cipher|-l username|-m HMAC alogorithm|-p port-number|-v {1|2}] hostname ipv4 address (OPTIONAL) Enter the IP address or the hostname of the remote device. (OPTIONAL) Enter the IP address in dotted decimal format A.B.C.D. ipv6 addressprefix (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prefix length in the /x format. The range is from /0 to /128 NOTE: The :: notation specifies successive hexadecimal fields of zeros. -c encryption cipher Enter the following encryption cipher to use. (For v2 clients only.) • 3des-cbc: Force ssh to use 3des-cbc encryption cipher. FIPS mode is enabled or disabled: • aes256-ctr: Force ssh to use the aes256-ctr encryption cipher. • aes256-cbc: Force ssh to use the aes128-cbc encryption cipher. • aes192-ctr: Force ssh to use the aes128-cbc encryption cipher. • aes192-cbc: Force ssh to use the aes256-cbc encryption cipher. • aes128-ctr: Force ssh to use the aes256-cbc encryption cipher. • aes128-cbc: Force ssh to use the aes128-cbc encryption cipher. • 3des-cbc: Force ssh to use 3des-cbc encryption cipher. -l username -m HMAC algorithm (OPTIONAL) Enter the keyword -l then the user name used in this SSH session. The default is the user name of the user associated with the terminal. Enter one of the following HMAC algorithms to use. (For v2 clients only.): Without the FIPS mode enabled: • hmac-shal-96: Force ssh to use the hmac-sha1-96 HMAC algorithm. FIPS Cryptography 651