Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 721

detail (OPTIONAL) Enter the keyword detail to display the IGMPv3 source information. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S4810, S4820T, S5000, S6000, Z9000, and Z9500. Usage Information This command displays the IGMP database, including configured entries for either all groups on all interfaces, all groups on specific interfaces, or specific groups on specific interfaces. The following describes the show ip igmp groups command shown in the following example. Field Group Address Interface Mode Uptime Expires Last Reporter Member Ports Description Lists the multicast address for the IGMP group. Lists the interface type, slot and port number. Displays the IGMP version used. Displays the amount of time the group has been operational. Displays the amount of time until the entry expires. Displays the IP address of the last host to be a member of the IGMP group. Indicates the port channel. If the port channel is VLT, an asterisk (*) after the port channel number indicates the port channel is locally down and that a remote VLT port is up. Example Dell# show ip igmp snooping groups Total Number of Groups: 1 IGMP Connected Group Membership Group Address Interface Mode Expires Last Reporter 225.1.1.1 Vlan 10 IGMPv2-Compat 00:02:09 1.1.1.2 Uptime 00:00:07 Internet Group Management Protocol (IGMP) 721