Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 822

show crypto ipsec policy Display the crypto policy configuration. Syntax show crypto ipsec policy Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.2(0.2) 9.2(1.0) Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the Z9000, S4810, and S4820T. Introduced on the Z9500. Example Dell(conf-crypto-policy)# do show crypto ipsec policy Policy name : pol1 Policy refcount : 0 Sequence Num : 1 SA Mode : IPSEC-MANUAL Transform-Set Name : Peer IP Address : Inbound AH SPI : 0 Inbound ESP Auth SPI : 0 Inbound ESP Encry SPI : 0 Inbound AH Key : [0]:: Inbound ESP Auth Key : [0]:: Inbound ESP Encry Key : [0]:: Outbound AH SPI : 0 Outbound ESP Auth SPI : 0 Outbound ESP Encry SPI: 0 Outound AH Key : [0]:: Outound ESP Auth Key : [0]:: Outound ESP Encry Key : [0]:: Match sequence Num : 2 Protocol type : tcp IP or IPv6 : IP Source address : 1.1.1.1 Source mask : /32 Source port : 0 Destination address : 1.1.1.2 Destination mask : /32 Destination port : 23 source-interface name : source-interface num : 822 Internet Protocol Security (IPSec)